WDS-S7 Bga Rework Station Chip Repair Machine PS4 Laptop IC Repair Machine

S7 BGA Rework Station IC Chip Hot Air Welding Equipment SMT Infrared Soldering Repair Tools 3 Temperature Area Touch Screen

Item Description

II. Product Specifications and Technical Parameters

1. Power Supply: AC220V±10% 50/60Hz

2. Total Power: 4.8KW

3. Heater Power: Upper Hot Air Heater 0.8KW

Lower Hot Air Heater 1.2KW

Bottom Infrared Heater 2.7KW

Other Power: 0.1KW

4. Electrical Components: PLC Programmable Controller + Large-Screen True-Color Touch Screen + High-Precision Intelligent Temperature Control Module

5. Temperature Control: K-type high-temperature thermocouple closed-loop control, independent temperature control, accuracy up to ±3 degrees Celsius

6. Positioning Method: V-shaped slot + PCB bracket adjustable X.Y and equipped with universal clamps + red dot alignment

7. PCB Dimensions: Max 480×345mm, Min 10×10mm

8. Overall Dimensions: L655×W600×H590mm (excluding monitor bracket)

9. Machine Weight: 34kg

10. Exterior Color: Black

 

About this item

I. Installation Requirements for the Rework Station

1. Keep away from flammable, explosive, and corrosive gases or liquids.

2. Avoid high-humidity environments; air humidity should be less than 90%.

3. Ambient temperature: -10℃ to 40℃; avoid direct sunlight and exposure to intense heat.

4. Operating environment free from dust, floating fibers, and metal particles.

5. The installation surface must be level, secure, and vibration-free.

6. Do not place heavy objects on the machine.

7. Avoid direct airflow from air conditioners, heaters, or ventilators.

8. Leave at least 30cm of space behind the rework station for heat dissipation.

9. The recommended surface area (900×900 mm) of the workbench for placing the rework station should be relatively horizontal, and the height should be 750-850 mm.

10. Wiring must be performed by qualified technical personnel. The main line should be 2.5 square millimeters, and the equipment must be properly grounded.

11. Turn off the main power switch when the equipment is not in use. Unplug the power cord if the equipment is to be idle for an extended period.

Packaging and delivery